FOR-A FA-9600 Series Operation Manual page 118

<Simultaneous 4K/HD mode>
<3D-LUT mode>
Item Default
SDI 1 (FS1)
Source
Select
SDI 2 (FS2)
Input Link
(UHD) Single Link
(FA-964K)
Terminal
-
Assign
W/o
FA-964K
(FS1/2)
Loss Mode
W/
FA-964K
(FS1)
Back Color Black
Format
Auto Detect
Setting
If Format Setting is set to Manual, specify the format using the following settings.
For supported video formats, see Sec. 16-1. "Specifications."
Standard 1080
Horizontal
1920/3840
Size
Frame Rate 59.94i
Level Follow Input
Setting
IN1
IN2
HDMI IN
EX3G IN1 to IN4
SFP RX1 to RX4
Single Link
Dual Link
Quad Link
-
Back Color
Black
Auto Freeze
Color
SDI Output Mute
Back Color (Link)
Back Color
(Separate)
Black
Auto Freeze
Color
SDI Output Mute
(Link)
(Link)
SDI Output Mute
(Separate)
Black, Blue
Red, Magenta
Green, Cyan
Yellow
Auto Detect
Manual
SD
720
1080
2160
1920/3840
60p, 59.94p, 50p
48p, 47.95p
30p, 29.97p
25p, 24p, 23.98p
60i, 59.94i, 50i
24PsF, 23.98PsF
30PsF, 29.97PsF
25PsF
Follow Input
Level-A
Level-B
118
Description
Selects a signal input to FS1 or FS2.
EX3G IN1 to EX3G IN4: Require
FA-96EX3G44-R.
SFP RX1 to SFP RX4: Require FA-96SFPC4.
Selects an SDI Link format for UHD 4K.(Quad
Link requires FA-96EX3G44-R or
FA-96SFPC4)
Displays the signal status that is selected
under Source Select (FS1 only).
Selects the output mode for input signal loss.
Back Color: Outputs a monochrome (set
under Back Color below) video.
Auto Freeze: Freezes and outputs the last
normal video.
SDI Output Mute: Outputs no video signal so
that the FA-9600 downstream device can
detect video loss.
See <p 46> for 4K multi-link input loss.
Back Color (Link): Outputs a monochrome
(set under Back Color below) video.
Back Color (Separate): Output the input
video displaying monochrome (set under Back
Color) for the lost part.
SDI Output Mute(Link): Stops video output if
any one of four links is lost for Quad Link video.
SDI Output Mute(Separate): Stops video
output if all four links are lost for Quad Link
video.
Specifies a color used in Loss Mode.
Specifies the FS output format.
Auto: FS input signal format.
Manual: Signal format specified below.
Specifies the vertical image resolution.(2160
available only on FS1 and FA-964K required)
(Not used)
Specifies the frame / field rate.
Specifies the SDI mapping level.