FOR-A FA-9600 Series Operation Manual page 138

Set the following parameters if Overwrite is selected for Payload ID.
See Sec. 5-30. "VIDEO PAYLOAD ID 1, 2."
HD Payload
Enable
ID
CS/DR
Auto
Embedded
Color
Rec.709
Space
Dynamic
SDR
Range
◆
Vertical Ancillary Multiplex
Item Default
Mode Pass
Set the following parameters if Mode is set to Rewrite.
ARIB
Disable
STD-B37
ARIB
Disable
STD-B39
User Packet
(Support Disable
planned)
Set the following parameters if ARIB STD-B39 is set to Overwrite.
Audio
Pass
Method
Audio
Unused
Mode Data
Disable
Enables/disables insertion of payload identifiers
into HD-SDI.
Enable
Sets the Payload ID codes insertion mode for
Dynamic Range and Color Space.
Auto: Automatically inserts the codes according to
the Dynamic Range Conv. setting. (See Sec. 5-4.
"INPUT / OUTPUT GAMMA / COLOR.")
Auto
Bypass: Payload ID codes in input signal are
Manual
inserted. If set to Operate, Payload ID codes
suitable to output gamma and color gamut are
inserted.
Manual: Inserts the codes according to the
following parameter settings.
Rec.709
VANC
Selects a color space (gamut).
UHDTV
Unknown
SDR
HLG
Selects a dynamic range.
PQ
Unspecified
Setting
Selects the VANC data insertion mode to each FS
output.
Pass: Passes through the input VANC data without
processing. If input and output signal formats are
different, the VANC space becomes blank.
Pass
Rewrite: Outputs black in the VANC area. If ARIB
Rewrite
STD-B37 STD-B39 and/or User Packet are set to
other than Disable in the ANC DATA INSERTION
menu (See Sec. 5-37.) and the packet is included
in input signal, it is inserted in the proper space on
the output signal.
Disable Disable: Inserts no data packets.
Through
Through: Inserts data packets of input without
change.
Disable
Overwrite: Inserts the internally generated control
Through
signal packet defined by ARIB STD-B39.
Overwrite
Audio data information to be inserted should be set
under Audio Method and Audio Mode Data below.
Disable
See Sec. 5-37. "ANC DATA INSERTION" for more
Through
details.
Pass: Passes the input signal ARIB STD-B39
Audio Mode data through to the output or
overwrites the new information if input and output
Pass
audio formats are different.
Overwrite
Overwrite: Replaces the audio information to the
one set under Mode Data if ARIB STD-B39 Audio
Mode data is inserted in the input signal.
Selects the Audio Mode data from the table in Sec.
-
6-4.
138
Description