FOR-A FA-9600 Series Operation Manual page 26

Refer to the table below to use your suitable control devices or tools.
To control from FA-10RU or FA-10DCCRU
>> Set Remote Unit to Accept in the Remote Control Unit Setting menu (See Sec. 7-4).
To control using LAN commands
>> Set LAN Command to Accept in the same menu as above.
To control using Ember+ commands
>> Set Ember+ to Accept in the same menu as above
Remote control Device
FA-10RU FA-10RU
(*1)
FA-10RU
FA-AUX30
FA-10DCCRU FA-
(*1)
10DCCRU
FA-
10DCCRU
FA-AUX30
Windows GUI PCs
(Software)
Tablets
(*1)
Web GUI Computers
(Web browser) Tablets
Commands Computers
(Original)
Tablets
(*2)
Commands Control unit
(Ember+)
(*3)
SNMP Computers
monitoring
Tablets
GPIO GPIO
control
device
(*1)
Up to 5 connections per FA-9600 are available for Windows GUI, FA-10RU and
FA-10DCCRU at a time.
*2)
( Up to 2 connections per FA-9600 are available for LAN commands at a time.
(*3)
Up to 5 connections per FA-9600 are available for Ember+ commands at a time.
Connection Function
LAN Almost all menu settings
Event Save/Load
Backup settings
LAN & Expanded control switches
original added to FA-10RU.
cables
LAN Remote control unit dedicated
to Color Correction feature.
LAN & Expanded control switches
original added to FA-10DCCRU.
cables
LAN Almost all menu settings
Launcher tool for Window GUI.
LAN Device status monitoring
FA-9600 network settings
Import/export events and
gamma, gamut and lut data.
LAN Status messages and menu
settings
LAN Status messages and menu
settings
LAN Status monitoring and traps
GPI GPI input/output using
FA-96GPI and/or
FA-96DB9-CBL options.
26
Refer to
FA-10RU
Operation
Manual
FA-10RU
Operation
Manual
FA-10DCCRU
Operation
Manual
FA-10DCCRU
Operation
Manual
Sec. 9
Sec. 11.
Sec. 10.
Sec. 12
Sec. 13.
FA-9600
Command
Manual
Appendix 2:
Ember+
Sec. 15.
Sec. 7-1.