Touch Screen - Xerox DocuColor 1632 User Manual

Touch Screen

Message Area
Unused Memory
Quantity
Tab
Selection Buttons
Message
Area
Selection
Buttons
The Touch Screen is used to select features on the User Interface.
Press the buttons and tabs displayed in the Touch Screen to set
features or to instruct operations on screens. The selected buttons
are highlighted to indicate activation. Buttons that do not have
three-dimensional shadows are not active, and cannot be
selected.
Messages such as machine status and operation instructions are
displayed here
The amount of memory remaining to store a scanned original is
displayed prior to output.
The copy quantity is entered using the keypad, and appears in the
upper right corner of the message area. Select between 1 - 999.
Feature Tabs displayed on the Touch Screen contain the
programmable selections available for each feature.
Allow for the selection of feature / functions required for the
desired output. Buttons identified, as More... have additional
features, which will be displayed when this button is selected.
U G
S E R
Unused
Memory
Tab
( C )
U I D E O P I E R
Quantity
1–7