Xerox DocuColor 1632 User Manual page 21

7
On the Added Features tab, select Output to program the desired
copy output option.
• Press Collated for collated output. Collated will automatically
be selected when the DADF is used.
• Press Collated / Stapled to direct output to the Finisher
(optional Accessory). Press Finisher Tray to set the Output
Destination. Press Stapling on the Output screen to select
the Original Orientation and Staple Position on the output.
Press the desired option and touch the Save button to return to
the Basic Copying screen.
8
On the Image Quality tab, select Original Type to display the
Original Type screen.
• Press an option for Original Type if a setting other than the
default is desired.
Press the Save button to return to the Image Quality screen.
9
If other features are desired, select the appropriate feature tab
and feature button on the Touch Screen.
10
Perform one of the following:
• If you use the Duplex Automatic Document Feeder, place the
document face up into the Original Input Area. The Document
Feeder Lamp lights when the document is in the correct
position. Ensure that the paper guide is against the original
document.
• Raise the Duplex Automatic Document Feeder (DADF) and
place the document face down on the Document Glass.
• Ensure that the document lies against the registration area
at the left rear corner of the glass.
• Lower the Duplex Automatic Document Feeder (DADF).
11
Press the Start button.
12
When copying is completed, perform the following:
• Remove the copies from the Center Output Tray or Finisher
Tray on the right side of the printer/copier.
• Remove the original document(s) from the Document Glass or
Original Catch Tray.
U G ( C
S E R U I D E O P I E R
1–15
)