Finisher (Optional Accessory); Using The Finisher - Xerox DocuColor 1632 User Manual

U G ( C
S E R U I D E O P I E R

Finisher (Optional Accessory)

Finisher Cover Button
Finisher Tray
Finisher Front Door
Staple Cartridge
Finisher Stand
Finisher Interface
Center Tray Exit Cover

Using the Finisher

1 – 8 6
)
The DocuColor printer/copier may be equipped with an optional
Finisher. The Finisher contains the following components:
Provides access to the Finisher paper path.
Completed jobs are delivered to this tray.
Provides access to the Stapler area.
Load a new staple pack when needed.
Supports the Finisher and may be used for storage.
Delivers the copies to the Finisher.
Provides access to the paper path.
WARNING: Never cheat the safety interlock switch. Injury or
a document jam may occur. This switch shuts off the Finisher
power when you open the front door or when you move the
Finisher to the right to clear a paper jam.
The Finisher can staple from 2 to 50 sheets (50-sheet maximum
applies to up to 24lb / 90 gsm paper.) You can staple both portrait
and landscape documents with single or dual staples. Output to
the Finisher Tray is delivered face down. The Finisher Tray can
hold up to 1000 sheets.
• Jobs containing more than 50 sheets will not be stapled.
• Tray 5 (Bypass) cannot be selected as the paper source for a
job going to the Finisher.