Reduce/Enlarge - Xerox DocuColor 1632 User Manual

U G ( C
S E R U I D E O P I E R
Presets%
Variable%
Independent X-Y%
Independent X-Y% Auto
1 – 3 0
)

Reduce/Enlarge

The Reduce/Enlarge feature allows you to copy the image at
different magnifications. Copies may be reduced to 25% or
enlarged to 400%, in 1% increments.
The following options are available:
100% Copies are the same size as the original. This is the default
setting.
Auto% This option automatically reduces or enlarges the copy, based on
the size and orientation of the document and the paper supply
selected. This option is applied only to standard size documents.
The copy image will be reduced or enlarged in the same
proportions for X (horizontal) and Y (vertical) directions.
Auto Paper selection is not available when Auto% is selected.
There are 7 preset percentages to choose from. The selected
percentage displays in the value box on the Reduce/Enlarge
screen. These presets can be changed in System Settings mode.
Select the Variable% option to enter the desired percentage for
Reduce/Enlarge. Use either the up and down arrows or the
number buttons that display on the Touch Screen. Copies may be
reduced to 25% or enlarged to 400%. Selections can be made in
1% increments.
Select the Independent X-Y% option to copy the image at
different, independent magnifications from 25% to 400% for the X
and Y directions.
For example, you can enlarge the image to 129% in the X
direction and reduce it to 64% in the Y direction by using the
Touch Screen arrows.
The Auto option automatically calculates the reduction and
enlargement based on the original document size and on the
output paper size when using Independent X-Y%. The copy image
will be reduced or enlarged in the different proportions for X and Y
directions.