Warranty; Technical Specifications - Nissei WSK-1011 Instructoin Manual

Digital blood pressure monitor
Hide thumbs Also See for WSK-1011:
Table of Contents

Advertisement

Nothing is shown on
Batteries are discharged.
the display.
Batteries are installed incorrectly.
Connecting terminals are contaminated.
Power source is not connected.
You touched the START/STOP button when installing the batteries.
If, despite the above-given recommendations, you fail to obtain the right measurements, stop the operation and contact the service center (addresses and
telephone numbers of authorized organizations are provided in the warranty certifi cate). Do not attempt to adjust the device internal mechanism on your own.

WARRANTY

1. The manufacturer guarantees the warranty period of 5 years for the device from the sale date provided that the consumer observes
operation, transportation and storage requirements. The warranty period for the cuff and the power source is 12 months from the sale date.
2. Warranty liabilities are documented with the warranty certifi cate upon selling the device to the buyer. The guarantee is valid provided
that the device has not been opened or damaged by the buyer.
3. Addresses of organizations engaged in the warranty service are specifi ed in the warranty certifi cate.

TECHNICAL SPECIFICATIONS

Operating Principle
Indicator
Indicating Range:
cuff pressure, mmHg
Measuring Range :
cuff pressure, mmHg
pulse rate, bpm
Replace all batteries with new ones.
Install batteries properly.
Wipe connecting terminals with a dry cloth.
Connect the power source.
Turn off the device by pressing the START/STOP button and perform
the measurement again.
Oscillometric method
15 digits liquid crystal display
0-300
50-250 (systolic), 40-180 (diastolic)
40 - 160
13

Advertisement

Table of Contents
loading

Table of Contents