Warranty - Nissei DS-10a Instructoin Manual

Measurement results are dif-
ferent in clinic and at home.
No time indication on
the display.
If, despite the above-given recommendations, you fail to obtain the right measurements, stop the operation and
contact the service center (addresses and telephone numbers of authorized organizations are provided in the
warranty certifi cate). Do not attempt to adjust the device internal mechanism on your own.

WARRANTY

1. The manufacturer guarantees the warranty period of 5 years for the device from the sale date pro-
vided that the consumer observes operation, transportation and storage requirements. The war-
ranty period for the cuff and the AC Adaptor is 12 months from the sale date.
2. Warranty liabilities are documented with the warranty certifi cate upon selling the device to the buyer.
The guarantee is valid provided that the device has not been opened or damaged by the buyer.
3. Addresses of organizations engaged in the warranty service are specifi ed in the warranty certifi cate.
Eff ect of relaxed state at home and
tension in clinic.
Maximum allowable pressure: the
pressure cannot be measured because
of movement or conversation during
the measurement, although the cuff has
been pumped to the maximal extent.
Pressure can not be measured due to
movement or talking.
Cuff is not securely connected to the device.
Cuff is not put on properly.
Batteries are discharged.
Batteries are discharged.
Batteries are installed incorrectly.
Connecting terminals are contaminated.
AC Adaptor is not connected.
« »
You pressed button when
.
installing the batteries
Show the pressure records made at home to
your doctor for advice.
Do not talk and do not move during the
measurement.
Do not talk and do not move during the
measurement.
Check the connection.
Make sure that the cuff is put on correctly.
Replace all batteries with new ones.
Replace all batteries with new ones.
Install batteries properly.
Wipe connecting terminals with a dry cloth.
Connect the AC Adaptor.
Turn off the device by pressing the
button and perform the measurement again
10
« »