Page 1
WSK-1011 INSTRUCTOIN MANUAL DIGITAL BLOOD PRESSURE MONITOR WSK-1011 INSTRUKCJA OBSŁUGI CIŚNIENIOMIERZA CYFROWEGO WSK-1011 РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ НА ЦИФРОВ ТОНОМЕТЪР WSK-1011 UŽIVATELSKÝ NÁVOD K DIGITÁLNÍMU TONOMETRU WSK-1011 A WSK-1011 TÍPUSÚ DIGITÁLIS TONOMÉTER HASZNÁLATI UTASÍTÁSA MANUAL DE UTILIZARE A TENSIOMETRULUI DIGITAL WSK-1011...
This manual contains information useful for safe and effi cient operation of digital blood pressure monitor model WSK-1011 (hereinafter “De- vice”). Do not use this device in any manner other than that specifi ed in this manual. Please look thoroughly through this manual and particu- larly “Recommendations for Correct Measurement”.
Pulse pressure – along with the measurement result the device displays the pulse pressure value. Pulse pressure is a diff erence between systolic and diastolic pressure. M-Cuff series is a unique cuff unit designed and patented by NISSEI. M-shaped cuff can read pulse wave simultaneously from two arteries.
COMPLETE SET The complete set WSK-1011 includes: - Electronic unit with cuff – 1 pc. - Batteries – 2 pcs. - Bag – 1 pc. - Instruction Manual – 1 pc. - Packaging – 1 pc. RECOMMENDATIONS ON CORRECT MEASUREMENTS 1.
Page 5
4. In case of cardiovascular diseases and a number of other diseases that require the blood pressure monitoring, measurements should be carried out in the hours specifi ed by a doctor. REMEMBER THAT THE DIAGNOSTICS AND ANY TREATMENT OF ARTERIAL HYPERTENSION SHOULD BE CARRIED OUT ONLY BY A DOCTOR BASED ON BLOOD PRESSURE READINGS OBTAINED BY A DOCTOR.
POWER SUPPLY OF THE DEVICE 1. Disconnect the battery compartment (Fig.2). 2. Install two “AA” batteries in the compartment. Make sure that polarity corresponds to signs (+) and (-) shown inside the compartment (Fig. 3). Batteries are readily installed by pressing the end “-“ on the spring. 3.
Setting the Year Use the button to increase and button to decrease the year value. Press the SET button to confi rm and to pass to the next step Setting the Month button to increase and button to decrease the month value. Press the SET button to confi rm and to pass to the next step Use the Setting the Day Use the...
In case of unavailability of a table 1. Sit down on a chair. that you can be comfortably seated with your legs uncrossed, feet fl at on the fl oor and back supported. 2. Bring the cuff to the heart level lightly pressing your left hand to the chest (Fig.6). 3.
Page 9
5. When the measurement is completed, the display will show the values of blood pressure, pulse Pulse, stroke/min. pressure, WHO scale and heart rate (Fig.11). The device will automatically release the air from the cuff . 6. Press the button or button and the result will remain in the selected memory unit.
Page 10
Table of Results by the WHO Scale Indication WHO Classifi cation Hypertension (severe) >180 >110 Hypertension (moderate) 160-179 100-109 Hypertension (slight) 140-159 90-99 Increased normal pressure 130-139 85-89 Normal pressure 120-129 80-84 Optimal <120 <80 Indication of Pulse Pressure This device calculates and displays the pulse pressure value (Fig. 14). Pulse pressure – a diff erence be- tween the systolic and diastolic pressures –...
date and time should be set before the measurement. When an error occurs (ERR), the measurement results are not saved. Viewing the Saved Data 1. Turn off the device by pressing the START/STOP button. To view the results stored in the memory unit 1, press , and to view the results stored in the memory unit 2, press .
Page 12
Measurement results are Eff ect of measurement conditions, physical or mental state. Take measurements under the same conditions. diff erent each time. Measurement results are Eff ect of relaxed state at home and tension in clinic. Show the pressure records made at home to your doctor for advice. diff...
Nothing is shown on Batteries are discharged. Replace all batteries with new ones. the display. Batteries are installed incorrectly. Install batteries properly. Connecting terminals are contaminated. Wipe connecting terminals with a dry cloth. Power source is not connected. Connect the power source. You touched the START/STOP button when installing the batteries.
Page 14
Accuracy: ±3 cuff pressure, mmHg pulse rate, % ±5 Infl ation Automatic infl ation (air pump, Fuzzy Infl ation algorithm) Defl ation Automatic Defl ation (electric valve) Electric supply voltage, V Electric supply type Two 1.5 volt LR6 (AA alkaline) batteries Memory 2 units, 60 values per each + average value Operating Condition...
Key to Symbols Type BF applied part Refer to instruction manual/booklet Keep dry When utilizing the waste, refer to current rules applicable in your region *This device complies with EN1060-1:1995+A2:2009 Non-invasive sphygmomanometers Part 1: General requirements and EN1060-3:1997+A2:2009 Non- invasive sphygmomanometers Part 3: Supplementary requirements for electro-mechanical blood pressure measuring system *Accuracy is guaranteed with the measured values that are within the measuring range.
TECHNICAL DESCRIPTION WSK-1011 complies with the Electromagnetic Disturbances standard, IEC60601-1-2:2014. As a medical electrical equipment, special precautions regarding the electromagnetic disturbances shall be taken at usage of the device according to the information provided below. • The device is not intended for use in environments where the intensity of electromagnetic disturbance is high, such as near active HF surgical equipment and MRI (magnetic resonance imaging) equipment etc.