Table of Contents
Advertisement
date and time should be set before the measurement. When an error occurs (ERR), the measurement results are not saved.
Viewing the Saved Data
1. Turn off the device by pressing the START/STOP button. To view the results stored in the memory unit 1, press , and to view the results
stored in the memory unit 2, press . The selected memory unit will be underlined on the display.
The display shows the average value of stored results indicated with index « » (Fig.15). Average value is
displayed when the selected memory unit contains two or more saved measurement results.
2. Each time you press the
sequential manner.
3. Memory unit number, measurement date and time will be displayed one by one in the upper right
corner of the display.
4. The result saved in the memory unit 1 is the most recent among the saved data in the selected memory.
The higher memory number, the older the result.
The memory data are displayed for about 30 seconds and after that, if no button is pressed, the device is
automatically turned off .
Pressing the
button switches the display from records in the memory unit 1 to records in the memory
unit 2, while pressing the
button results in returning to data recorded in the memory unit 1.
5. Press the START/STOP button to turn off the device.
Deletion of Saved Data
Readings can be deleted unit by unit: all together or separately. The memory may be cleared when the selected memory unit contains two
or more results.
1 . Select a value from the memory unit to be deleted or the average value (unit with index « ») to clear the whole memory unit.
2 . Press and hold the
button or
INFORMATION ABOUT ERRORS
INDICATION
Blood pressure is too
The cuff is not at the heart level.
low or too high.
The cuff is put on incorrectly.
During the measurement, a person was talking or moving.
button or
button, saved measurement results will be displayed in a
until the sign «---» appears on the display.
LIKELY CAUSE
Put on the cuff at the heart level.
Check the cuff position on the wrist.
Be calm and quiet during the measurement.
11
Selected memory
indicator
Number of saved measurements
Fig.15
METHODS OF CORRECTION
Average
value
index
Advertisement
Table of Contents
