Nissei WSK-1011 Instructoin Manual page 12

Digital blood pressure monitor
Hide thumbs Also See for WSK-1011:
Table of Contents

Advertisement

Measurement results are
Eff ect of measurement conditions, physical or mental state.
diff erent each time.
Measurement results are
Eff ect of relaxed state at home and tension in clinic.
diff erent in clinic and
at home.
Infl ation is repeated.
If the initial pressure is insuffi cient, infl ate the cuff again. Infl ate the
cuff till your pressure will be successfully measured.
Maximum allowable pressure: pressure can not be measured due to
movement or talking during the measurement, in spite of the fact that
the cuff was pumped at maximum.
Pressure can not be measured due to movement or talking.
or
Cuff is not securely connected to the device.
Cuff is not put on properly.
Batteries are discharged.
No time indication on
Time was not set.
the display.
Note: there is no time indication when batteries and/or power source
are not provided.
Date and time are
Time was not set or measurements were carried out before setting
displayed as «--/--».
the time.
Take measurements under the same conditions.
Show the pressure records made at home to your doctor for advice.
Re-infl ation is not a malfunction of the device. Do not talk and do not
move during the measurement.
Do not talk and do not move during the measurement.
Do not talk and do not move during the measurement.
Check the connection.
Make sure that the cuff is put on correctly.
Replace all batteries with new ones.
Set time and date.
Install batteries and connect the power source.
Set date and time.
Date and time can not be saved without setting.
12

Advertisement

Table of Contents
loading

Table of Contents