Information About Errors - Nissei WSK-1011 Instruction Manual

Pressing the button switches the display from records in the memory unit 1 to records in the memory unit 2, while pressing the
results in returning to data recorded in the memory unit 1.
5. Press the START/STOP button to turn off the device.
Deletion of Saved Data
Readings can be deleted unit by unit: all together or separately. The memory may be cleared when the selected memory unit contains two
or more results.
1 . Select a value from the memory unit to be deleted or the average value (unit with index « ») to clear the whole memory unit.
2 . Press and hold the button or

INFORMATION ABOUT ERRORS

INDICATION
Blood pressure is too The cuff is not at the heart level.
low or too high. The cuff is put on incorrectly.
During the measurement, a person was talking or moving.
Measurement results are Eff ect of measurement conditions, physical or mental state.
diff erent each time.
Measurement results are Eff ect of relaxed state at home and tension in clinic.
diff erent in clinic and
at home.
Infl ation is repeated.. If the initial pressure is insuffi cient, infl ate the cuff again. Infl ate the
cuff till your pressure will be successfully measured.
Maximum allowable pressure: pressure can not be measured due to
movement or talking during the measurement, in spite of the fact that
the cuff was pumped at maximum.
until the sign «---» appears on the display.
LIKELY CAUSE
Put on the cuff at the heart level.
Check the cuff position on the hand.
Be calm and quiet during the measurement.
Take measurements under the same conditions.
Show the pressure records made at home to your doctor for advice.
Re-infl ation is not a malfunction of the device. Do not talk and do not
move during the measurement.
Do not talk and do not move during the measurement.
11
METHODS OF CORRECTION
button