Table of Contents
Advertisement
2 Unwinder / Winder Operation
2.5 Operating the Winder
This section provides instructions for using the Unwinder / Winder.
1. Set a media core on the Winder. Ensure that the size of the core is that same size as the media
roll core.
● When using the Winder, be sure to use the paper core supplied with the product.
2. Install the roll media onto the Unwinder and printer.
3. On the Printer Control Panel, push the key [Forward] to feed out the media tip to the paper core on
the Winder Spindles.
Figure 30. Feed Media
100kg Unwinder / Winder User Guide
21
Advertisement
Table of Contents
