Table of Contents
Advertisement
2.1.3 Unwinder Control Panel
The Unwinder Control Panel is used to set the operating mode and to display the status of the
Unwinder.
2.1.3.1 Switches / Button
No.
1
Automatic
Operation
Switch
2
Manual
Operation
Switch
3
Initialize Button
2.1.3.2 Indicators
No.
4
Power Lamp
5
Error Lamp
100kg Unwinder / Winder User Guide
4
1
Figure 6. Unwinder Control Panel
Part name
● OUTSIDE ROLL: Used when using paper rolled in the
outward direction.
● OFF: Feeding device does not operate.
● INSIDE ROLL: Used when using roll paper rolled in the
inward direction.
● NORMAL DRIVE: Feeding device operates in the
forward direction.
● REVERSAL: Feeding device operates in the reverse
direction.
Used to move the position of the tension roller to where
paper can be fed out.
Part name
State
Lit
Blinking During feeding
Power is OFF.
Off
Over-current error in feeding motor.
Lit
Blinking Time-out error.
No error.
Off
3
Function
Function
● Power is ON.
● Stand-by.
2 Unwinder / Winder Operation
5
2
7
Advertisement
Table of Contents
