Removing A Printed Media Core From The Winder - Xerox 8254E User Manual

2 Unwinder / Winder Operation

2.6 Removing a Printed Media Core from the Winder

This section will explain the procedure to remove the media core from the Winder.
1. Set the Winder Automatic Operation Switch to OFF.
2. If the media core being removed is partially filled with printed media, cut the media from the
remaining media in the Printer Platen.
3. Set the Manual Operation Switch to "NORMAL DRIVE" and roll in the remaining printer media on
the core.
Figure 33. Set Manual Operation Switch
4. Remove the printer media core from the Winder and install a new empty media core on the Winder
Spindles.
100kg Unwinder / Winder User Guide 23