Table of Contents
Advertisement
2 Unwinder / Winder Operation
2.1.4 Winder Control Panel
The Winder Control Panel is used to set the operating mode and to display the status of the Winder.
2.1.4.1 Switches
No.
1
Automatic
Operation
Switch
2
Manual
Operation
Switch
2.1.4.2 Indicators
No.
3
Power Lamp
4
Error Lamp
8
3
1
Figure 7. Winder Control Panel
Part name
● OUTSIDE ROLL: Used when the roll paper is rolled in
the outward direction.
● OFF: Roll-in device is not being operated.
● INSIDE ROLL: Used when the roll paper is rolled in the
inward direction.
● NORMAL DRIVE: Roll-in device turns in the forward
direction.
● REVERSAL: Roll-in device turns in the reverse
direction.
Part name
State
Lit
Blinking During roll-in operation.
Power is OFF.
Off
Over-current error in roll-in motor.
Lit
Blinking Time-out error.
No error.
Off
Function
Function
● Power is ON.
● Stand-by.
100kg Unwinder / Winder User Guide
4
2
Advertisement
Table of Contents
