Table of Contents
Advertisement
11. Set the Unwinder Automatic Operation Switch as described below:
If the paper will be printed on the outside of the roll media: OUTSIDE ROLL
・
If the paper will be printed on the inside of the roll media: INSIDE ROLL
・
12. Raise the tension roller located on the rear of the product with your hands. Roll media will
automatically be fed out.
100kg Unwinder / Winder User Guide
Figure 20. Set the Automatic Operation Switch
Figure 21. Raise the Tension Roller
No.
1
Roll Media
2
Tension Roller
2 Unwinder / Winder Operation
Part name
2
1
15
Advertisement
Table of Contents
