Media Types; Plain Paper - Xerox Phaser 6120 User Manual

Media Types

Before purchasing a large quantity of special media, do a trial print with the
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For information about recommended paper and specialty media, see
the Recommended Media List at www.xerox.com/office/6120support.

Plain Paper

Capacity
Orientation
Driver Media Type Plain paper
Weight
Duplexing
Use plain paper that is
Suitable for laser printers, such as standard or recycled office paper.
CAUTION
Do not use the media types listed below. These could cause poor print
quality, paper jams, or cause damage to the printer.
DO NOT use media that is
Coated with a processed surface (such as carbon paper, digitally gloss-
coated media, and colored paper that has been treated)
Carbon backed
Iron-on transfer media (such as heat-sensitive paper, heat-pressure
paper, and heat-press transfer paper)
Cold-water-transfer paper
Pressure sensitive
Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
Already been printed on by another printer, copier, or fax machine
Dusty
Wet (or damp)
46
Tray 1 Up to 200 sheets, depending on the
paper weight
Tray 2 Up to 500 sheets, depending on the
paper weight
Face up
60 to 90 g/m² (16 to 24 lb. bond)
See page 45 for supported sizes.
Media Types