Clearing Paper Jams - Xerox Phaser 6120 User Manual

Clearing Paper Jams

To avoid damage, always remove misfed media gently, without tearing it.
Any piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note:
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.
WARNING!
Unfused toner can dirty your hands, clothes, or anything else it gets on. If you
accidentally get toner on your clothes, lightly dust them off as best as you
can. If some toner remains on your clothes, use cool, not hot water, to rinse
the toner off. If toner gets on your skin, wash it off with cool water and a mild
soap.
WARNING!
If you get toner in your eyes, wash it out immediately with cool water and
consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer's top cover. This should clear the
misfeed message.
Clearing Paper Jams
105