Xerox Phaser 6120 User Manual page 40

TRAY
SWITCHING*
*
Settings
DUPLEX
If
OFF
If
LONGEDGE
the paper for long-edge binding.
If
SHORTEDGE
the paper for short-edge binding.
Settings
ORIENTAT
ION
Specify the orientation of the media.
Settings
JAM
RECOVERY
Select whether or not the page is printed again after recovering from a
paper misfeed.
If
ON
If
OFF
printing the misfed page.
** These menu items appear only if the optional Tray 2 is installed.
About the Control Panel
Settings
If is selected and the specified paper tray runs
YES
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If is selected and the specified paper tray runs out
NO
of paper, printing stops.
OFF/SHORTEDGE/LONGEDGE
is selected, duplex printing is not possible.
is selected, the pages will be printed on both sides of
is selected, the pages will be printed on both sides of
PORTRAIT/LANDSCAPE
ON/OFF
is selected, the page that was misfed is printed again.
is selected, printing continues with the next page without
YES/NO
33