This message...
PUT "SIZE" "TYPE"
IN TRAY 1
PUT "SIZE" "TYPE"
IN TRAY 2
REPLACE IMAGING
UNIT
REPLACE X TONER
X TONER MISSING
132
means...
The paper size set from
the printer driver is
different from the size of
paper loaded into Tray 1.
This message appears
when
PAPER MENU/
INPUT TRAY/TRAY 1
is set to
MODE
.
CASSETTE
The paper size set from
the printer driver is
different from the size of
paper loaded into Tray 2.
This message appears
when
PAPER MENU/
INPUT TRAY/AUTO
is set to
CONTINUE
.
OFF
Imaging unit is out.
The X toner cartridge is
empty.
This message appears
when the
QUALITY/
TONER OUT ACTION
menu is set
STOP
The X toner cartridge is
not installed.
Status, Error, and Service Messages
do this...
When
PAPER MENU/
INPUT TRAY/AUTO
CONTINUE
Printing continues with
paper of a different size,
even if this message
appeared.
To print using paper of the
desired size, load paper of
the correct size, and then try
printing again.
When
PAPER MENU/
INPUT TRAY/AUTO
CONTINUE
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
Load paper of the correct
size.
In addition, press the Down
key to be able to print using
the loaded paper.
Replace the imaging unit.
Replace the toner cartridge.
.
Install a X toner cartridge.
is set to
:
ON
is set to
:
OFF