Loading Media - Xerox Phaser 6120 User Manual

Loading Media

How do I load media?
Take off the top and bottom sheets of a ream of paper. Holding a stack of
approximately 200 sheets at a time, fan the stack to prevent static buildup
before inserting it in a tray.
Do not fan transparencies.
CAUTION
Although this printer was designed for printing on a wide range of media
types, it is not intended to print exclusively on a single media type except
plain paper. Continuous printing on media other than plain paper (such as
envelopes, labels, thick stock, or transparencies) may adversely affect print
quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Do not mix media of different types and sizes, as this will cause
media misfeeds.
56 Loading Media