Error Messages (Operator Call)
This message...
DISK ERROR
DISK FULL
DUPLEX UNIT
DOOR OPEN
FATAL ERROR
PRINTER COVER OPEN
IMAGING UNIT
MISSING
PAPER JAM DUPLEX
PAPER JAM EXIT
PAPER JAM FUSER
PAPER JAM TRANSFER
PAPER JAM TRAY X
Status, Error, and Service Messages
means...
The hard disk is full or
damaged.
The hard disk is full or
damaged.
Duplex cover is open.
Sensor error.
The printer's top cover is
open.
The imaging unit is not
installed.
Paper has jammed in the
duplex unit.
Paper has jammed in the
fuser area.
Paper has jammed in the
transfer roller area. This
type of jam means that
the paper did not make it
to the paper exit area.
Paper has jammed while
being pulled from the
specified tray (X).
do this...
Initialize the hard disk or, if
the error continues to occur,
replace the hard disk.
To initialize the hard disk,
select
SYSTEM
DEFAULT/FORMAT/
.
FORMAT DISK
Initialize the hard disk.
To initialize the hard disk,
select
SYSTEM
DEFAULT/FORMAT/
.
FORMAT DISK
Close the duplex cover.
Open and close front cover
to automatically clean
density sensor parts.
Close the top cover.
Install the imaging unit.
Locate and remove the jam.
Locate and remove the jam.
131