Introduction; Antistatic Protection - Xerox Phaser 6120 User Manual

Xerox color laser printer user guide phaser 6120
Hide thumbs Also See for Phaser 6120:
Table of Contents

Advertisement

Introduction

CAUTION
Use of non-Xerox supplies is not recommended. The Xerox Warranty,
Service Agreements, and Total Satisfaction Guarantee do not cover damage,
malfunction, or degradation of performance caused by use of non-Xerox
supplies, or the use of Xerox supplies not specified for this printer. The Total
Satisfaction Guarantee is available in the United States and Canada.
Coverage may vary outside these areas; please contact your local
representative for details.
This chapter provides information about the following accessories.
Dual In-Line Memory Module
(DIMM)
Duplex Unit
Tray 2
Hard Drive
Note:
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.

Antistatic Protection

CAUTION
It's very important to protect the printer controller board from electrostatic
damage while performing any task involving the controller board.
Turn off all power switches first. Discharge your body's static electric charge
by touching a grounded surface before you handle any printer boards or
components. Also avoid walking around after grounding yourself.
136
For details on the available options, contact your local reseller or
refer to www.xerox.com/office/6120supplies.
128 MB DIMM
Auto duplexing
500-sheet tray
20 GB Hard Drive
Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

6120n - phaser color laser printer

Table of Contents