Before Beginning - Havis DS-PAN-720 Series Owner's Manual

Docking station for panasonic toughbook g1 tablet
Hide thumbs Also See for DS-PAN-720 Series:
Table of Contents

Advertisement

Before Beginning

Havis is pleased to provide this Owner's Manual to aid in the proper installation and use of the
DS-PAN-720 Series Docking Station for the Panasonic TOUGHBOOK G1 Tablet.
For questions regarding the set-up of your DS-PAN-720 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
This Owner's Manual applies to the following Part Numbers:
DS-PAN-721
DS-PAN-722
DS-PAN-721-2
DS-PAN-722-2
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.
ARE PRESENT
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR UNDOCKING WITH YOUR
COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES CAN CAUSE PERMANENT DAMAGE.
• FOR THE DS-PAN-721, DS-PAN-721-2, DS-PAN-722 & DS-PAN-722-2 DOCKING STATIONS: DO NOT CONNECT
DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certified, automotive grade, Panasonic approved
90W power source rated for a continuous, regulated 16VDC output (Havis Part Number LPS-114 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT repairable and is NOT covered
under warranty.
• FOR THE DS-PAN-723 DOCKING STATION: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The
Panasonic TOUGHBOOK G1 Tablet requires a certified, Panasonic approved power source rated for a continuous,
regulated 16VDC output. Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY (DS-PAN-722, DS-PAN-722-3,
& DS-PAN-726) REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN 0°C to 50°C (32°F to 120°F).
PLEASE REFER TO PANASONIC TOUGHBOOK L1 OWNER'S MANUAL FOR MORE INFORMATION.
Precautions
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply (Part # LPS-114) with this Docking Station
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of
time
DS-PAN-723
DS-PAN-726

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents