Page 1
Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic CF-19 Toughbook DS-PAN-210 Series/220 Series DS-PAN-211 DS-PAN-212 DS-PAN-213 DS-PAN-214 DS-PAN-221 DS-PAN-211-2 DS-PAN-212-2 DS-PAN-214-2 DS-PAN-221-2 www.havis.com 1-800-524-9900...
Page 2
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-210 Series/220 Series Docking Station for the Panasonic CF-19 laptop computer. For questions regarding the set-up of your DS-PAN-210 Series/220 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com...
-20° C to 60° C ( -4° F to 140° F ) * DS-PAN-211 DECLARATION OF CONFORMITY FOR CE MARKING Havis, Inc. declares that their DS-PAN-210 SERIES/DS-PAN-220 DOCKING STATIONS: Are classified within the following EU Directives: EU Electromagnetic Compatibility Directive 2004/108/EC...
Parts Included Docking Station Latch Handle Docking Connector Lock Front Hooks Front USB Port Dock Indicator LED Mounting Bracket Hardware Kit This Hardware Kit includes: 1. Zip Ties (4) 2. Keys (2) 3. 1/4”-20 x 5/8” long Button Head Screws (3) 4.
Mounting Bracket to the Motion Device using (3) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 120 in-lbs (13.4Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’.
Cable Management Tip the Docking Station to a position that is comfortable to work with. Install all cables that are necessary for computing needs. Use Zip Ties (Hardware Kit Item 1) to strain relieve cables at rear of Docking Station. Gather all cables to one side and tie off to unused holes on underside of Docking Station.
Page 7
Tie off cables onto a stationary part of the mounting system. This loop must be large enough to allow full range of expected rotation and extension without stressing connections. Collect cables and secure to the mounting system. (Note: mounting system not included) www.havis.com • 1-800-524-9900...
Operation - Docking • DO NOT MATE COMPUTER TO DOCKING STATION UNLESS COMPUTER’S DOCKING CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT. • DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. Ensure Docking Station is unlatched by positioning the Latch Handle to the “UNDOCK”...
Operation - Undocking If previously locked, unlock Docking Station using supplied key. Rotate Latch Handle counter-clockwise to the “UNDOCK” position. Once unlatched grab both sides of computer and carefully lift out of Docking Station, rear end first. www.havis.com • 1-800-524-9900...
Page 10
Installation of Power Supply (LPS-101 - Optional) Power off computer and ensure all cables are disconnected from computer. Plug in both input and output cables (supplied with LPS-101) into the Power Supply brick. With the Docking Station right side up, drop (4) #6-32 screws (supplied with LPS-101) through the holes in Docking Station.
Page 11
Work tabs outward so that retaining features on both sides of Clip fit through positioning window on the Screen Stiffener Upper Bracket. Plug the Laptop Lighting USB connector into one of the USB ports in your computer or Docking Station. www.havis.com • 1-800-524-9900...
Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-210 Series and DS-PAN-220 Series Docking Station. For more information or to order please visit www.havis.com. DS-DA-405 Screen Stiffener Secure your laptop screen to prevent excess wear and reduce vibration while in use.