Page 1
Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic CF-53 Toughbook DS-PAN-410 Series DS-PAN-411 DS-PAN-412 DS-PAN-411-2 DS-PAN-412-2 DS-PAN-413 PKG-DS-PAN-412 PKG-DS-PAN-412-2 www.havis.com 1-800-524-9900...
• THE DS-PAN-410 SERIES DOCKING STATIONS ARE DESIGNED EXCLUSIVELY FOR USE WITH PANASONIC CF-53 TOUGHBOOK COMPUTERS ONLY AND ARE NOT BACKWARD COMPATIBLE WITH THE PANASONIC CF-52 COMPUTER • FOR DOCKING STATION MODELS EQUIPPED WITH AN INTEGRATED POWER SUPPLY (DS-PAN-412, DS-PAN-412-2, PKG-DS-PAN-412, PKG-DS-PAN-412-2) LIND POWER SUPPLY REFERENCE GUIDE. DS-PAN-413 PKG-DS-PAN-412...
Table of Contents Specifications Parts Included Port Replication Capability Installation Cable Management Operation - Docking Operation - Undocking Precautions • Do not place metal objects or containers of liquid on top of the Docking Station • If a malfunction occurs, immediately unplug the Power Supply and remove the laptop •...
• 5/32” Hex Drive (For attaching Mounting Bracket to Motion Device and Docking Station to Mounting Bracket with Button Head 1/4”-20 Screws) Antenna Module (DS-PAN-411-2, DS-PAN-412-2, and PKG-DS-PAN-412-2 ONLY) Front Latching Handle Barrel Lock / Dock Release Locator Pins Docking Connector...
Port Replication Capability NOTE: Antennas only available on select Docking Station models (DS-PAN-411-2, DS-PAN-412-2, PKG-DS-PAN-412-2) Ethernet RJ45 • THIS DOCKING STATION IS EQUIPPED WITH ONE USB 3.0 PORT, INDICATED BY THE FOLLOWING SYMBOL ( IN THIS PORT HOWEVER, USB 3.0 PERIPHERALS WILL OF THE THREE (3) USB 2.0 PORTS...
Installation Remove the Mounting Bracket from the packaging. Install the Mounting Bracket to the Motion Device using (3) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’...
ON THE DOCKING STATION TO ENSURE LATCHING AND UNLATCHING MOTION IS NOT RESTRICTED. Gather all cables to one side and tie off to unused holes on underside of Docking Station. Insert as many zip ties as necessary to secure cables. www.havis.com • 1-800-524-9900 (DS-PAN-411-2, DS-PAN-412-2, PKG-DS-PAN-412-2)
Page 8
Cable Management (continued) Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion. Tie off cables onto a stationary part of the mounting system. This loop must be large enough to allow full range of expected rotation and extension without stressing connections.
Operation - Docking DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION. Ensure Docking Station is unlatched by depressing button in Barrel Lock. With rear of computer elevated, load front of computer into Docking Station ensuring the computer’s handle extends under the Front Hold-Down Bracket.
Operation - Undocking If previously locked, unlock Docking Station using supplied key. Depress Barrel Lock to unlatch Docking Station from computer. Once unlatched grab both sides of computer and carefully lift out of Docking Station, rear end first.
Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-410 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-103 120W Power Supply External power supply and cable for Panasonic CF-53 Toughbooks with cigarette lighter adaptor. DS-DA-410 Screen Stiffener Secure your laptop screen to prevent excess wear...
Page 12
Havis, Inc. 75 Jacksonville Road, PO Box 2099 Warminster, PA 18974 47801 Anchor Court Plymouth, MI 48170 www.havis.com 1-800-524-9900 DS-PAN-410-SERIES_OMN_8-11...