Related Manuals for Havis DS-PAN-1000 Series
Summary of Contents for Havis DS-PAN-1000 Series
- Page 1 Owner’s Manual Havis Rugged Mobile Docking Station For Panasonic Toughbook 20 DS-PAN-1000 Series DS-PAN-1001 DS-PAN-1002 DS-PAN-1003 DS-PAN-1001-2 DS-PAN-1002-2 DS-PAN-1006 www.havis.com 1-800-524-9900...
- Page 2 Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-1000 Series Docking Station for the Panasonic Toughbook 20, 2-in-1 laptop computer. For questions regarding the set-up of your DS-PAN-1000 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
- Page 3 Bruce Jonik, Director of Engineering , Havis, Inc. FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-PAN-100X not expressly approved by Havis, Inc. could void the user's authority to operate this equipment.
- Page 4 Parts Included Docking Station Rear Hooks (x2) Docking Connector Locator Pins (x2) Pass-Through Antenna Ground Pins (x3) (Dual, optional) Release Handle Barrel Lock Front Hooks (x2) Front Fence Mounting Bracket Hardware Kit (HWK-0046) This Hardware Kit includes: 1. Zip Ties (5) 2.
- Page 5 Port Replication Capability Port Replication & Pass-Through RF (DS-PAN-1001, DS-PAN-1001-2, DS-PAN-1002, DS-PAN-1002-2) Antenna (TNC) Optional: Part IDs (DS-PAN-1001-2, DS-PAN-1002-2) External Antenna Switch Power Ethernet DISABLED / ENABLED Input RJ45 USB 3.0 HDMI Serial (x2) DC IN 16V Antenna Identification (DS-PAN-1001-2, DS-PAN-1002-2) Antenna Connectors Laptop Interface (TNC)
- Page 6 Mounting Bracket to the Motion Device using (4) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’...
- Page 7 Installation & Cable Management (continued) Lower the Docking Station to the Mounting Bracket as shown and secure with (4) 1/4”-20 x 3/8” long screws (Hardware Kit Item 4). Ensure cable bundle remains in Cable Channel before securing. Torque screws to 80 in-lbs (9.0 Nm) ±...
- Page 8 Operation - Docking DO NOT FORCE LAPTOP ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK THE ALIGNMENT OF LAPTOP ON DOCKING STATION. Ensure the Docking Station is unlocked. Unlatch Rear Hooks by pushing down on Release Handle, then pushing in until a click can be heard. Latched Rear Hooks Unlatched Rear Hooks (Ready to dock Toughbook 33)
- Page 9 Operation - Docking (continued) With rear of computer elevated, load front of computer into Docking Station ensuring the computer’s front hook pockets align with the Front Hooks of the Docking Station as shown. Front View Lower rear of computer onto Docking Station, ensuring computer properly aligns with the Locator Pins on the Docking Station.
- Page 10 Operation - Docking (continued) For theft deterrence, secure computer by locking Docking Station with supplied key (Hardware Kit Item 2). Operation - Undocking If previously locked, unlock Docking Station using supplied key. Unlatch computer from Docking Station by, pushing down on Release Handle, then pushing in until Rear Hooks unlatch and a click can be heard.
- Page 11 Operation - Undocking (continued) Once unlatched grab Toughbook 20 from carrying handle or each side and carefully lift out of Docking Station, rear first. ONCE DOCKED, THE DISPLAY OF THE TOUGHBOOK 20 CAN ONLY OPEN APPROXIMATELY 165° AT WHICH TIME IT WILL CONTACT THE DOCKING STATION’S REAR HOOKS.
- Page 12 Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-1000 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-102 90W Power Supply External power supply and cable for Panasonic Toughbook 20 with cigarette lighter adaptor.