Installation - Havis DS-PAN-720 Series Owner's Manual

Installation

1) Align Docking Station mounting holes with the holes on VESA 75mm hole pattern device.
Using the four (4) M4 x 0.7x12mm Pan Head Screws (Hardware Kit Item 3), eight (8)
Washers, M4 (Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5),
secure the Docking Station to device. Torque screws to 20 in-lbs (2.3Nm) ± 10%.
A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218).
ENSURE (4) WASHERS ARE INSTALLED BETWEEN
MOUNTING EQUIPMENT AND DOCKING STATION
B) In-Vehicle mounting system installation.
ENSURE (4) WASHERS ARE INSTALLED BETWEEN
MOUNTING EQUIPMENT AND DOCKING STATION
Washer, M4
Washer, M4
Lock Washer, M4
M4 x 0.7x12mm
Pan Head Screws
Desktop Stand
(not included)
Washer, M4
Washer, M4
Lock Washer, M4
M4 x 0.7x12mm
Pan Head Screws
Typical Mounting Device
(not included)