Related Manuals for Havis DS-PAN-900 Series
Summary of Contents for Havis DS-PAN-900 Series
- Page 1 Owner’s Manual Havis Docking Station For Panasonic Toughpads FZ-M1 & FZ-B2 DS-PAN-900 Series DS-PAN-901 DS-PAN-905 DS-PAN-901-2 DS-PAN-905-2 DS-PAN-902 DS-PAN-906 DS-PAN-902-2 DS-PAN-906-2 DS-PAN-903 www.havis.com 1-800-524-9900...
- Page 2 Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-PAN-900 Series Docking Station for the Panasonic Toughpads FZ-M1 and FZ-B2. For questions regarding the set-up of your DS-PAN-900 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
- Page 3 Bruce Jonik, Director of Engineering , Havis, Inc. FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-PAN-90X not expressly approved by Havis, Inc. could void the user's authority to operate this equipment.
- Page 4 Parts Included Docking Station Barrel Lock Latch Handle Latch Tab Alignment Posts Docking Connector (Hidden from view in this illustration) Ground Pins Mounting Holes (x4) (VESA 75mm Hole Pattern) Ports Strain Relief Anchor Points Hardware Kit This Hardware Kit includes: 1.
- Page 5 Internal/External Antenna Selection Switches Power Input Antennas DS-PAN-905-2 DS-PAN-906-2 (optional) Antenna Identification (DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, DS-PAN-906-2) In reference to the Panasonic FZ-M1 Antenna connections ANT A = Lower ANT B = Upper Downward Facing Antennas Tablet Interface www.havis.com • 1-800-524-9900...
- Page 6 (Hardware Kit Item 3), four (4) Washers, M4 (Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the Docking Station to device. Torque screws to 20 in-lbs (2.3Nm) ± 10%. Havis Desktop Stand installation (sold seperately, Part # DS-DA-218). Washer, M4 Lock Washer, M4 M4 x 0.7x12mm...
- Page 7 Tie off cables onto a stationary part of the mounting system. Collect cables and secure to the mounting system. This loop must be large enough to allow full range of expected (Note: Mounting system not included) rotation and extension without stressing connections. www.havis.com • 1-800-524-9900...
- Page 8 Operation - Docking TO ENSURE A PROPER CONNECTION, PLEASE READ THE FOLLOWING BEFORE DOCKING YOUR TABLET. POUR VOUS ASSURER D’UN BRANCHEMENT CORRECT, VEUILLEZ LIRE CE QUI SUIT AVANT DE FIXER VOTRE TABLETTE À LA STATION D’ACCEUIL. DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK THAT YOUR TABLET IS CORRECTLY CONFIGURED FOR THE DOCKING STATION NE FORCEZ PAS LA TABLETTE SUR LA STATION D’ACCUEIL.
- Page 9 Pivot tablet into the Docking Station and lower the Latch Handle to secure tablet in place. If there is excessive force while lowering the Latch Handle, check orientation and position of tablet Latch Tab will engage in front of your Toughpad FZ-M1 www.havis.com • 1-800-524-9900...
- Page 10 Operation - Docking (continued) For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit Item 2). Operation - Undocking If previously locked, unlock Docking Station using supplied key. While holding tablet with one hand, lift the Latch Handle on the top of Docking Station.
- Page 11 Related Products Havis offers a wide variety of accessory products specifically for use with the DS-PAN-900 Series Docking Station. For more information or to order, please visit www.havis.com. DS-DA-218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office.
- Page 12 Havis, Inc. 75 Jacksonville Road Warminster, PA 18974 www.havis.com 1-800-524-9900 DS-PAN-900-SERIES_OMN_7-21...