Havis DS-PAN-720 Series Owner's Manual page 10

Operation - Docking (continued)
1) Ensure Docking Station is unlatched by lifting the Latch Handle.
2) Hold tablet in landscape orientation, with bottom angled toward the Docking Station, aligning the
tablet's Docking Connector with the Docking Station's Docking Connector. Lower tablet into the bottom
of the Docking Station while ensuring that the alignment grooves are aligned with the Docking Station's
Alignment Posts.
3) Pivot tablet so the top pushes against the Docking Station's rubber bumpers. While holding the tablet
firmly against the bumpers, pull forward and down on the Latch Handle to secure tablet in place.
NOTE: The Latch Handle will drive the Latch Hook over the front of the tablet. Pull the Latch Handle
until it snaps into position.