Cable Management - Havis DS-PAN-720 Series Owner's Manual

Cable Management

1) Tip the Docking Station to a position that is comfortable to work with.
2) Connect all cables that are necessary for computing needs.
3) Use Zip Ties (Hardware Kit Item 1) and/or Zip Tie Mounts (Hardware Kit Item 6) to strain relieve cables.
Strain Relief Points are located above each port and on the bottom of Docking Station and should be
used to anchor each cable.
4) Create a service loop with cables to ensue that no tension is on the connectors and to enable intended
motion.
5) Tie off cables onto a stationary part of the mounting system.
4
This loop must be large enough to allow
full range of expected rotation and
extension without stressing connections.
5
Collect cables to secure to the
mounting system.
(Note: mounting system not included)
Zip Tie Mount
M4 x 0.7x12mm
Pan Head Screw