Furuno WR2120 Installation Manual page 26

Case 3: The radar stand is higher than 2m.
The ladders are placed inside the rack for safety during lifting.
In order to climb the scaffold from the inside of the radar stand, it has to make a structure with a
gap at least one place where the service engineer can go through. However, do not set it on the
cable introduction side of ATU. (Because there is a cable protection tube)
The scaffold may not need to fold if there is no risk to hit the people. In addition, when the
storage type is eliminated, the scaffold may be expanded. (However, consider that birds may
form a nest if scaffold is unfoldable)
ATU
Scaffold
Ladder
Figure 4.6: Whole image
20