Side Lobe - Furuno WR2120 Installation Manual

Figure 1.3: Image of using 3 radars
1.5.

Side Lobe

The energy radiated from an antenna forms a field having a definite radiation pattern. A radiation
pattern is a way of plotting the radiated energy from an antenna. This energy is measured at
various angles at a constant distance from the antenna. The shape of this pattern depends on the
type of antenna used.
To plot this pattern, two different types of graphs, rectangular-and polar-coordinate graphs are
used. The polar-coordinated graph has proved to be of great use in studying radiation patterns. In
the polar-coordinate graph, points are located by projection along a rotating axis (radius) to an
intersection with one of several concentric, equally-spaced circles. The polar-coordinate graph of
the measured radiation is shown in Figure 1.5.
The main beam (or main lobe) is the region around the direction of maximum radiation (usually the
region that is within 3 dB of the peak of the main beam). The main beam in Figure 1.5 is
northbound.
The side lobes are smaller beams that are away from the main beam. These side lobes are
usually radiation in undesired directions which can never be completely eliminated. The side lobe
level (or side lobe ratio) is an important parameter used to characterize radiation patterns. It is the
maximum value of the side lobes away from the main beam and is expressed in Decibels. One
side lobe is called back lobe. This is the portion of radiation pattern that is directed opposing the
main beam direction.
The graph shows the rectangular-coordinated graph for the same source. In the rectangular-
coordinate graph, points are located by projection from a pair of stationary, perpendicular axes.
The horizontal axis on the rectangular-coordinate graph corresponds to the circles on the
polar-coordinate graph. The vertical axis on the rectangular-coordinate graph corresponds to the
rotating axis (radius) on the polar-coordinate graph. The measurement scales in the graphs can
have linear as well as logarithmic steps.
Beam Width:
The angular range of the antenna pattern in which at least half of the maximum power is still
emitted is described as a "Beam Width". Bordering points of this main lobe are therefore the points
at which the field strength has fallen in the room around 3 dB regarding the maximum field
strength. This angle is then described as beam width or aperture angle or half power (- 3 dB) angle
- with notation Θ (also φ). The beam width Θ is exactly the angle between the 2 red marked
directions in the upper pictures. The angle Θ can be determined in the horizontal plane (with
notation Θ ) as well as in the vertical plane (with notation Θ
AZ
Main and Side Lobes (Minor Lobes):
The pattern shown in the upper figures has radiation concentrated in several lobes. The radiation
intensity in one lobe is considerably stronger than in the other. The strongest lobe is called main
lobe; the others are (minor) side lobes. Since the complex radiation patterns associated with
arrays frequently contain several lobes of varying intensity that should learn to use appropriate
terminology. In general, main lobes are those in which the greatest amount of radiation occurs.
Side or minor lobes are those in which the radiation intensity is least.
Start of
detection with
Cumulonimbus
FURUNO radar
early detection
from low
altitudes
FURUNO radar
Figure 1.4: FURUNO radar detects cumulonimbus cloud
faster than conventional radar
4
Start of detection with
conventional radar
Conventional radar
).
EL
Conventional
radar
FURUNO
radar