Chapter 8: Function - Flashforge Creator Pro User Manual

In this chapter, we will introduce the Creator Pro function to you. We will mainly introduce Utilities function
and other available functions in printing process, as Print from SO and Preheat are introduced in prior
chapters.
Utilities
Using the directional arrow buttons in the right of the screen to select Utilities, Press DK key on the
keypad, then you will see:
1. Monitor Mode
Select ii and then press OK, the display will indicate:
Creator Pro
R Extruder
L Extruder
Platform
2. Filament loading: Refer to Chapter 7
3. Preheat Setting: Refer to Chapter 7
4. General Settings
Select it and then press OK, the display will indicate:
Pause with Heat
Sound
Acceleration
Extruder Count
5. Level Build Plate
Build plate leveling refers to Chapter 5.
6.HomeAxes
Select it and then press OK. The dual-extruder will move backwards, and the build plate will elevate
up. It means Creator Pro is ready for printing.
7. Bot Statistics
Select it and then press OK, the display will indicate:
Lifetime (Accumulated time for printing)
Last Print (Spent time for the last printing)
Filament (Accumulated filament length for printing)
Fil.Trip (Accumulated filament length for printing)
8. Filament Odometer
Select it and then press OK, the display will indicate:
Life
(Accumulated filament length for printing)
Trip (Accumulated filament length for printing)
Reset (Press OK to reset the tip data)

Chapter 8: Function

[The dual-extruder print one model simultaneously!
(Reselect)
(Whether continue heating when pause printing)
76