Flashforge Creator Pro User Manual page 31

5. Duplicate: Select the object and duplicate the object through the following two methods:
♦ Method 1: Click [Edit] - [Duplicate].
• Method 2: Press the shortcut key Ctrl+V.
6. Delete: Select the object and delete the object through the following two methods:
♦ Method 1: Click [Edit] - [Delete].
• Method 2: Press the shortcut key Delete.
7. Auto Layout All: Click [Edit] - [Auto Layout All] after loading one or more than one models,
all models will be placed automatically as automatic placement rule.
8. Repair Models: Recover model error.
9. Supports: Refer to Chapter6.2.10.
6.2.14 Tools
6.2.141 Update Firmware
Before updating firmware, you need to find and depress "driver-creator-pro" in the SO card.
Click and install the relevant installation program.
Launch the FlashPrint [Now your computer and Creator Pro are connecting with each other],
click [Tools] and [Update Firmware], then click [DK] and a dialog box will pop up. Click [Yes] to
start firmware update.
� Update Firmware
Machine Type:
Select Firmware:
Select Serial:
Sailfish Firmware 7.8 for FlashForge Creator Pro
� Information
6.2.15 Help Menus
1. First Run Wizard: For first user to get FlashPrint functions and layout quickly.
2. Help Contents: Click [Help]--[Help Contents], you can read flashprint user guide.
3. Check for Updates: Click [Help]--[Check for Update] to detect the available updates online.
4. About FlashPrint: Click [Help]--[About FlashPrint], the software information box will pop up.
I
FlashForgr Creator Pro
I
ff creatorx-2560 v7.8.0-Pro-20160523
I
Upgrading firmware might interrupt the printer's task, ensure your
printer is in an idle state.
The contents include the current software version and copyright
information.
71
X
..-1
..-1
..-1 I I
Rescan
X
��