Flashforge Creator Pro User Manual page 23

111!!111
liilllll
6.2.4 Views
1. Changing Views
Change model views by moving, rotating, scaling.
Drag:
Click the [View] icon and then you can move the object by the following three methods:
• Method 1: Hold down the left mouse button and drag.
• Method 2: Hold down the mouse wheel and scroll up and down.
• Method 3: Hold down the Shift key, hold down the right mouse button and drag.
Rotate:
Click the [View] icon and then you can rotate the object by the following two methods:
• Method 1 Hold down the right mouse button and drag.
• Method 2. Hold down the Shift key, hold down the left mouse button and drag.
Scale:
Scroll the mouse wheel to enlarge or shrink the build plate.
2.SetView
Allow users to view the object on the build plate. Six views are under the view menu, that is
bottom view, top view, front view, back view, left view and right view.
Method 1: Click the the [View] button, there are six views in the drop- down list.
Method 2: Click the the [View] icon on the left, click it again and a submenu will appear with
six views for selecting.
3. Reset View
Allow users to reset views by the following two methods:
Method 1: Click the [View] menu and select [Home View].
Method 2: Click the [View] button on the left, click it again and you will see the viewing options,
you can click [Reset].
4. Show Model Outline
Click [View] - [Show Model Outline], it will highlight the yellow border of the object.
Seal
63