Flashforge Creator Pro User Manual page 22

II
6.2.3 Loading
You can load a model file or Geode file into your FlashPrint by the following six methods:
• Method 1: Click the Load icon on the main interface. Then select the object file.
• Method 2: Select the file for loading and drag the file to the main interface of the software.
• Method 3: Click [File] - [Load File]. Then select the object file for loading.
• Method 4: Click [File] - [Examples] to load the example files.
• Method 5: Click [File] - [Recent Files] to load the files opened recently.
• Method 6: Select and click-drag the target file to the icon of FlashPrint.
3D models can be stored as .stt .obj and .fpp file and support edit by FlashPrint.
Note:
Generating Rilievo
Load .png, .jpg, .jpeg and .bmp files into the FlashPrint.And the following dialogue box will pop up.
The setting box includes settings for shape, mode, maximum thickness, base thickness, bottom
thickness, width, height, top diameter and bottom diameter.
including plane, tube, canister and lamp.
Shape:
including "darker is higher" and "lighter is higher".
Mode:
Maximum thickness:
The minimum raft thickness and the
Base thickness:
default value is 0.5mm.
Xvalue of the model.
Width:
Yvalue of the model.
Depth:
For tube, canister and lamp to set
Bottom thickness:
up bottom thickness.
For tube, canister and lamp to set up the
Top diameter:
top diameter.
For tube, canister and lamp to set
Bottom diameter:
up the bottom diameter.
Zvalue of the model.
62
� Convert image to stl
Plane
Shape:
Plane
Mode:
Tube
Canister
Base Thickness
Lamp
Seal
Miximum Thickness : t:t:4.uumm
'
Width(X):
� 1
�l
Depth(Y):
1
Tube/ Canister
X
00 m m
==== =!
= = =
_oo_m_m
____ �
OK Cancel