Flashforge Creator Pro User Manual page 38

17. Calibrate Nozzles
Select it and then press DK, the display will indicate:
XAxis Line
YAxis Lina
Done
18. Restore Settings
Select it and then press DK, the display will indicate:
Restore factory settings?
NO
YES
19.Eeprom
The setting is not suggested modified by users. Improper operation may cause the device shutting
down.
20. Version Information
Select it and than press OK, the display will indicate the basic information of the printer.
21. Exit Menu
Options during printing process: In the process of printing. we may encounter the inevitable
problem. At that situation, we have to pause printing.
First, press DK button or Left button to back to the menus. Than you will sea:
1. Back to Monitor
Select it and then press DK. the display will indicate:
Printer name
Printing progress
R Extruder
LExtruder
Platform
2. Cancel Print
3.Pause
4. Pause at ZPos
5. Change Speed
6. Change Temperature
7. Change HBPTemp
8. Set Cooling Fan
Whan ii display ON, press DK button. Then it will d
When it display OFF, press OK button. Than it will d
9. Set Lights Off
10. Print Statistics
Select it and then press DK. the display will indicate:
Print Time
Time Left
Filament
Auto-level inactive (build plate cannot move)
[Spent time for printing)
[Accumulated filament length for printing)
OFF. It means the cooling fan starting working;
ON. It means the cooling fan stopping working.
78