Preface; Introduction - Flashforge Creator Pro User Manual

Note: Each device must be tested before leaving factory. If there are some residues in extruder
or some tiny scratches on the build tape, it is normal and won't affect the printing quality.
On the completion of this User Guide, thanks all Flashforge engineers and the Flashforge 30
printer users for their unremitting efforts and sincere assistance.
The Flashforge Creator Pro User Guide is designed for the Creator Pro users to start their printing
journey with Flashforge Creator Pro. Even if you are familiar with earlier Flashforge machines or
30 printing technology, we still recommend that you read through this guide, as there is lots of
important information about the Creator Pro for you to get a better 30 experience.
For a better and more successful printing experience, you can refer to the following materials:
(1) Quick Start Guide
Users will find the Quick Start Guide together with the printer accessories. The Quick Start Guide
will help you start your print journey as soon as possible.
(2) Official Flashforge Website: www.flashforge.com
The official Flashforge website contains the up-to-date information concerning Flashforge
software, firmware, device maintenance and so on. Users are also able to get the contact
information from there.
♦ Please read Flashforge Creator Pro 30 Printer User Guide carefully before use.
The Flashforge Creator Pro 30 Printer User Guide contains the information needed for you to
set up and use this device.
This User Guide includes the following parts: Preface, Introduction and after-sale service.
The Preface section includes resource acquisition channel the overall framework of the
manual, and the problems that should be paid attention to.
The introduction section contains the presentation of 30 printing technology, equipment
introduction, unpacking and installation of equipment, software installation and usage.
After-sale section tells the user how to get the support and help.

Preface

Introduction

43