Chapter 8: Function; Chapter 9: Supports And Service - Flashforge Creator Pro User Manual

Chapter 8: Function

In this chapter, we will introduce the Creator Pro function to you. We will mainly introduce Utilities function
and other available functions in printing process, as Print from SD and Preheat are introduced in prior
chapters.
Utilities
Using the directional arrow buttons in the right of the screen to select Utilities, Press OK key on the
keypad, then you will see:
1. Monitor Mode
Select it and then press OK, the display will indicate:
Creator Pro
R Extruder
L Extruder
Platform
2. Filament loading: Refer to Chapter 7
3. Preheat Setting: Refer to Chapter 7
4. General Settings
Select it and then press OK, the display will indicate:
Ditto Printing
Override GcTemp
Pause with Heat
Sound
Acceleration
Extruder Count
5. Level Build Plate
Build plate leveling refers to Chapter 5.
6. Home Axes
Select it and then press OK. The dual-extruder will move backwards, and the build plate will elevate
up. It means Creator Pro is ready for printing.
7. Bot Statistics
Select it and then press OK, the display will indicate:
Lifetime (Accumulated time for printing)
Last Print (Spent time for the last printing)
Filament (Accumulated filament length for printing)
Fil. Trip (Accumulated filament length for printing)
8. Filament Odometer
Select it and then press OK, the display will indicate:
Life (Accumulated filament length for printing)
Trip (Accumulated filament length for printing)
Reset (Press OK to reset the Trip data)
(The dual-extruder print one model simultaneously)
(Reselect)
(Whether continue heating when pause printing)
35