Preface; Introduction - Flashforge Waxjet 400 User Manual

Preface

Note: Each device must be tested before leaving factory. If
there are some residues in nozzles or some tiny
scratches on the build plate, it is normal and won't
affect the printing quality.
Dear Flashforge users，
Thanks for your choice of Flashforge products and thanks
for your supports for Flashforge.
The Flashforge 3D printers are of high quality and
excellent performance. Even if you are familiar with earlier
FlashForge machines or 3D printing technology, we still
recommend that please read this guide, as there is lots of
important information about the WaxJet 400/410 series for
you to get a better 3D experience. The entire Flashforge team
is always ready to provide you with the best quality service.
The service
If the issues that are not covered by this guide while using the
printer, please contact FlashForge's customer support.
Please visit the FlashForge website for contact information:
www.flashforge.com and offer the firmware version of 3D
printer before contacting after-service team.(see "Firmware
version" on page 23) and hardware serial number (see
"Identify Printer" on page 16).
Software support
If there are some software issues that are not covered by this
guide, contact FlashForge's Customer Support.
Please visit the FlashForge website for contact information:
www.flashforge.com and offer the softeware version of 3D
printer before contacting after-service team.(see "Firmware
version" on page 23) and hardware serial number (see
"Identify Printer" on page 16).

Introduction

· Please read 《Flashforge WaxJet® 400/410
Industrial 3D printer User Guide》before opera-
tion.
· The WaxJetPrint software is constantly being
updated and screenshots in the user guide are for
reference only.
The WaxJetPrint software is constantly being updated and
screenshots in the user guide are for reference only. The
FlashForge WaxJet® 400/410 3D Printer User Guide contains the
information needed for you to set up and use this device.
This User Guide including the following parts: Preface,
Introduction and After-sale service.
The Preface section includes resource acquisition channel,
the overall framework of the manual, and the problems that
should be paid attention to while printing.
The introduction section contains the overview of 3D
printing technology, equipment introduction, unpacking and
installation of equipment, software installation and use.
After-sale section contains the user how to get the support
and help.
02
Note