Generated
Report
Window
PrinterMap User Guide
Figure 38 Reporting Parameters window
In the case of Standard Reports, specific From and To criteria may be set by
PrinterMap based on the Standard Report Polling Interval configuration values.
For example if standard report polling is configured to poll on a weekly basis,
PrinterMap sets Day and Hour parameters for the Reporting Parameters window.
The user is not able to modify these settings. Once the From and To parameters
are set, selecting the Show Report button initiates the report generation process.
At the completion of the report generation process a Report window is displayed.
The report window title indicates the type of report generated (standard versus
custom). The report heading contains information related to the generated report
time period (From and To values of the Reporting Parameters window). The
report heading for single printer reports also contains the printer' s name, model,
and serial number (if applicable). Below is an example of a user generated
standard report for the All Printers pre-defined group.
65