Media Mismatch Mode; Selecting Color Parameters; Media Page; Rendering Page - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Media Mismatch Mode

1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the

Media page.

2. Click on the Media Specific Settings list box to select a media type.
3. Press the Adjust Settings (Text Form), or Adjust Settings (Graphical UI) button to
go to the Media Specific Settings page.
4. Media Mismatch Mode - Select the QUERY mode if yo u want the printer to prompt
the operator at the printer control panel to install the appropriate media size. Select the
SUBSTITUTE mode if you want the printer to make media substitutions as necessary
to print the page. Select the SCALING mode if you want the printer to automatically
scale to the nearest available media size of the same media type.
NOTE: SUBSTITUTE is not a listed selection for the color printers because the
selected media is a key component of color print quality.
5. Select the Update Printer button.

Selecting Color Parameters

Color Settings and Processing Defaults are made on the Media Page and the Rendering
Page as follows:
Media Page
1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the
Media page.
2. Click on the Media Specific Settings list box to select a media type.
3. If you have a Java plug-in installed
(http://java.sun.com/products/archive/j2se/1.4.0/index.html), or if you have permissions
to install it for your browser, then select the Adjust Settings (Graphical UI) button. If
not, press the Adjust Settings (Text Form) button.
4. Make Cyan, Magenta, Yellow, and Black color ink selections to set up the ink limit and
output gamma that will be applied to the image.
Ink Limit is used to change the maximum amount of ink used in printing.
Gamma is used to adjust the entire color curve without moving the endpoints of the
curve. This adjusts the mid-tones (higher gamma produces darker mid tones), with
minimal effect on shadows and highlights.
See the Media Specific Settings section of the Media Page help file for details.
5. Press the Update Printer button.

Rendering Page

1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Rendering to display
the Rendering page.
Page 16
Web Print Manager Tool User Guide