Controlcentre 5.0; Installing Controlcentre; Running Controlcentre - Xerox WorkCentre M15 User Manual

ControlCentre 5.0

Using the Xerox WorkCentre M15/M15i ControlCentre 5.0 fax system data options can be set
up, phonebook entries can be created and edited and setup information can be viewed on the
PC.
After setting up fax data options or creating phonebooks, just click [Apply] on the
ControlCentre 5.0 screen to download the new settings to the machine.
i

Installing ControlCentre 5.0

When Xerox WorkCentre M15/M15i software is installed the Xerox WorkCentre M15/M15i
ControlCentre 5.0 utility is installed automatically.
For information
l
on installing
WorkCentre M15/
M15i software,
please refer to
"Installing
Software" on
page 2-16.

Running ControlCentre 5.0

Use the following instructions to run ControlCentre 5.0:
Start the Windows software.
Ø
Click the [Start] button on the desktop computer.
Ø
From Programs, Enter [Xerox WorkCentre M15/M15i], then [ControlCentre 5.0].
Ø
The Xerox WorkCentre M15/M15i ControlCentre 5.0 screen appears.
Ø
Page 9-20
WorkCentre M15 can only use ControlCentre 5.0 to upgrade firmware.
WorkCentre M15i can use the full funtionality of ControlCentre 5.0.
Xerox WorkCentre M15/M15i User Guide