Using Controlcentre - Xerox WC PE120 Series User Manual

Using ControlCentre

Using ControlCentre, you can create and edit Phonebook entries
from your computer and set up print and scan system data
options. You can also configure the destination launches when
you use the Scan-to... button on the control panel (see
page 2.38), and update the firmware of the machine (see
page 2.40).
1
To install the Xerox Control Centre, insert the supplied
Xerox Drivers CD.
2
From within Windows click Start and then Run. Type E:
Xinstall.exe, replacing "E" with the letter of your CD-ROM
drive.
3
When the language selection window appears, select the
appropriate language and then click Continue.
4
Choose Control Centre (if not already selected) and then
click Continue.
5
At the next screen accept your choice by clicking Continue
and then click Finish. Control Centre is now installed.
To open ControlCentre:
1
Start your Windows.
2
Click the Start button on your desktop computer.
Getting Started 2.37
2