Installing Software - Xerox WorkCentre M15 User Manual

Installing Software

Installing the drivers and other software will enable PC printing. Ensure the WorkCentre M15/
M15i is plugged in and connected to the computer's parallel or USB port before installing
software from the CD.
Windows 95 and
l
Windows NT 4.0
do not support
USB connection.
1
If a window
l
Ø
appears
concerning New
Hardware, select
Cancel.
2
Ø
Ø
Ø
Ø
3
For more
l
Ø
information about
printing refer to
the "Print" chapter
of this Guide.
Ø
Ø
Page 2-16
Switch on the PC and start
Windows.
Insert the Driver CD into the CD-
ROM drive of the PC.
If the Xerox screen appears
automatically, go to step 3.
From the Start menu, select
[Run].
Type D:\XINSTALL.EXE ( "D" is
the letter of the CD-ROM drive).
Select [OK].
Follow the on-screen instructions
to complete the software
installation.
After installing the software
reboot the PC.
For Windows 95/98 eject the CD
after re-start.
Run
Type the name of a program, folder, or document, and
Windows will open it for you.
Open:
D:\XINSTALL.EXE
OK
Xerox WorkCentre M15/M15i User Guide
Browse...
Cancel