Xerox WorkCentre M15 User Manual page 81

Priority Send Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
Ø
until 'FAX MODE' displays and press [Enter].
Use to transmit
l
high priority
Program the features required for the job.
Ø
documents
ahead of
Press [Menu/Exit] and press
Ø
reserved
[Enter].
operations.
Enter the number of the remote machine using the Numeric Keypad or the Speed Dial
Ø
function.
Press [Enter] to confirm the number.
Ø
If a name is required, enter a name for the job using the Numeric Keypad and press [Enter].
Ø
The originals are scanned into memory before transmission. The display shows the
memory % available and the number of pages scanned.
The document will be transmitted when the current operation is concluded. If a broadcast
operation is in progress, the Priority Send will be sent between transmissions or redial
attempts.
TX Poll Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
Ø
until 'FAX MODE' displays and press [Enter].
Use to allow
l
another fax
Program the features required for the job.
Ø
machine to
retrieve
Press [Menu/Exit] and press
Ø
documents from
the WorkCentre
Press
Ø
M15i.
The display requests a 4 digit poll code. The poll code is preset to 0000 at the factory, which
represents no poll code. If a poll code is entered, the person retrieving the documents will
need to enter the same poll code at the remote machine to gain access to the stored
documents at the WorkCentre M15i.
To use a poll code enter a 4 digit code, then press [Enter].
Ø
If a poll code is not required, ensure the display shows 0000 and press [Enter].
Ø
If access to the document is required by more than one remote machine, it can be stored in
the Bulletin Board memory. This allows the document to be retrieved more than once
without being deleted. If it is not stored in the Bulletin Board memory, it will be erased
automatically after being retrieved by one machine.
Using the
Ø
or 'OFF' to store the document in standard memory.
Press [Enter].The originals are scanned and stored in memory ready for polling. The
Ø
display shows the memory % available and the number of pages stored.
Xerox WorkCentre M15/M15i User Guide
or
or
or until 'TX POLL' displays, then press [Enter].
or key, select 'ON' to store the document in the Bulletin Board memory
until 'PRIORITY SEND' displays, then press
until 'POLLING' displays, then press [Enter].
Page 6-9