Conditions For Using The Booklet Carrier Sheet - Fujitsu FI-800R Operator's Manual

Conditions for Using the Booklet Carrier Sheet

●
Paper Size
The following paper sizes can be scanned:
● Booklet Carrier Sheet (150 × 195 mm)
● Passport (88 × 125 mm)
● Passbook (87 × 140 mm)
● Custom size
- Width
25.4 to 150 mm (1 to 5.9 in.)
- Length
25.4 to 195 mm (1 to 7.67 in.)
●
Paper Conditions
Paper Type
The following paper type is recommended:
● Booklet
Paper weight (thickness)
Documents with the following paper weight can be scanned:
● 5 mm (0.2 in.) or less
Precautions
Take note of the following:
● When using the Booklet Carrier Sheet
- Insert one Booklet Carrier Sheet into the return path opening at a time.
- Do not write on, color, stain, or cut the end with a black and white pattern on the Booklet Carrier
Sheet.
Otherwise, the Booklet Carrier Sheet may not be recognized correctly.
- Do not fold or pull the Booklet Carrier Sheet.
- Do not use a damaged Booklet Carrier Sheet.
Doing so may damage or cause the scanner to malfunction.
- Do not slide your finger on the edge of the Booklet Carrier Sheet.
Doing so may cut your finger.
- Even if the setting for a double-page spread image is enabled in the scanner driver, only the front side
image is output.
● When storing the Booklet Carrier Sheet
- Do not leave a document inside the Booklet Carrier Sheet for a long time.
Otherwise, the ink on the document may be transferred onto the Booklet Carrier Sheet.
64
How to Load Documents